This robust 304 stainless steel stock sheet, precisely fabricated to 0.602" thickness, 16" width, and 28" length, is specifically designed for critical hydraulic system components requiring superior corrosion resistance and mechanical integrity.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.602" |
| Length | 16" |
| Width | 28" |
Engineered for reliability and performance, this 304 stainless steel stock sheet offers exceptional strength and a non-reactive surface crucial for hydraulic fluid containment and flow control. Its 0.602" thickness provides substantial structural integrity against high pressures commonly encountered in hydraulic systems. The inherent corrosion resistance of 304 stainless steel ensures longevity in diverse environments, preventing contamination and maintaining system efficiency. Ideal for custom fabrication of hydraulic manifolds, valve bodies, accumulator shells, and other pressure-bearing components where material purity and resistance to wear and chemical attack are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect sheet for any surface defects or dimensional inaccuracies prior to machining. 2. Utilize appropriate machining techniques for 304 stainless steel, ensuring proper coolant and tool selection. 3. Perform post-machining cleaning to remove all contaminants before integration into the hydraulic system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel for hydraulic components. | Always specify and use corrosion-resistant materials like 304 stainless steel for hydraulic applications to prevent premature failure and contamination. |
| Inadequate cleaning after machining. | Thoroughly clean the machined stainless steel sheet to remove all metal shavings and machining fluids, which can compromise hydraulic fluid purity and system performance. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic Manifold Fabrication, Custom Hydraulic Cylinder Components, Pressure Vessel Construction for Hydraulic Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||