This 0.858" thick 304 stainless steel stock sheet provides exceptional corrosion resistance and structural integrity, crucial for robust hydraulic systems and components operating in harsh environments.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.858" |
| Length | 42" |
| Width | 20" |
Engineered for reliability and performance, this 304 stainless steel stock sheet boasts a substantial 0.858" thickness, ensuring superior strength and resistance to high pressures and mechanical stress common in hydraulic applications. Its 42" length and 20" width offer versatile fabrication capabilities for custom manifolds, valve bodies, pump housings, and structural supports. The 304 stainless steel alloy provides excellent resistance to a wide range of corrosive media, preventing degradation and extending component lifespan in demanding industrial, marine, and chemical processing environments. This material's inherent durability minimizes the risk of premature failure, ensuring consistent operational efficiency.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting and fabrication processes maintain material integrity and dimensional accuracy. 2. Thoroughly clean all surfaces to remove any contaminants before assembly into hydraulic systems. 3. Verify dimensional tolerances and surface finish meet system design requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower-grade steel that corrodes in hydraulic fluid or high-pressure environments. | Always specify and use 304 stainless steel or higher for hydraulic applications requiring corrosion resistance and strength. |
| Inadequate cleaning of fabricated parts, leading to contamination of hydraulic systems. | Implement rigorous cleaning protocols for all fabricated components before installation to prevent system damage. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic Manifold Blocks, High-Pressure Cylinder Components, Corrosion-Resistant Hydraulic Housings, Marine Hydraulic Systems, Chemical Processing Hydraulics.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||