This 304 stainless steel stock sheet offers exceptional corrosion resistance and durability. Precisely manufactured to 0.066" thickness, 45" length, and 13" width, it's ideal for demanding fabrication and construction projects.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.066" |
| Length | 45" |
| Width | 13" |
Specified by design engineers worldwide, this 304 stainless steel stock sheet conforms to ASTM A240 standards, ensuring superior performance. With a nominal thickness of 0.066 inches (approximately 1.68mm), a length of 45 inches (1143mm), and a width of 13 inches (330.2mm), it provides ample material for complex projects. The 304 grade offers excellent resistance to general corrosion, oxidation, and a wide range of chemicals, making it suitable for food processing equipment, architectural components, and marine hardware.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all cutting and forming tools are clean and appropriate for stainless steel. 2. Carefully measure and mark the desired dimensions on the sheet. 3. Utilize appropriate fabrication techniques (e.g., cutting, bending, welding) with suitable fasteners and methods for 304 stainless steel. 4. Clean the finished product thoroughly to remove any residual contaminants.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using carbon steel tools that can cause contamination and rust. | Always use dedicated stainless steel tools or ensure thorough cleaning of shared equipment before use. |
| Aggressive grinding or polishing that can alter the surface passivation layer. | Use fine-grit abrasives and polish in the direction of the grain to maintain corrosion resistance. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom metal fabrication, Industrial equipment components, Architectural cladding and trim.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||