Engineered for high-performance thermal management, this 0.560" thick 304 stainless steel stock sheet offers superior corrosion resistance and durability. Its robust construction ensures reliable performance in demanding heating and cooling environments.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.560" |
| Length | 21" |
| Width | 25" |
Precision-manufactured to tight tolerances, this 304 stainless steel stock sheet is optimized for thermal conductivity and structural integrity in HVAC and industrial heating applications. With a substantial 0.560" thickness, 21" length, and 25" width, it provides ample material for fabricating heat exchangers, ductwork, combustion chambers, and critical components exposed to elevated temperatures and corrosive media. The inherent passivation layer of 304 stainless steel safeguards against oxidation and pitting, ensuring extended service life and minimal maintenance in aggressive environments. Its excellent formability and weldability facilitate complex designs and integrations within existing systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Position the sheet accurately according to design specifications. 3. Secure the sheet using appropriate fastening methods (welding, bolting, or riveting) suitable for the application and intended load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate surface preparation before welding or fastening. | Thoroughly clean the sheet edges and surrounding area to remove any oils, dirt, or contaminants that could compromise weld integrity or fastener adhesion. |
| Over-stressing or deforming the sheet during installation, leading to premature failure. | Utilize proper material handling techniques and bending/forming equipment to avoid excessive strain, ensuring the sheet remains within its elastic limit. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Heat Exchanger Fabrication, Industrial Oven Components, High-Temperature Ductwork.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||