Engineered from robust 304 stainless steel, this stock sheet offers exceptional durability and corrosion resistance, making it ideal for critical hydraulic system components. Precisely manufactured to meet rigorous industrial standards.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.241" |
| Length | 17" |
| Width | 39" |
A proven choice for industrial professionals, this 304 stainless steel stock sheet exhibits a thickness of 0.241 inches, a length of 17 inches, and a width of 39 inches. Its 304 grade ensures excellent resistance to a wide range of corrosive media commonly found in hydraulic systems, including water, brine, and organic acids. This material's inherent strength and formability allow for the fabrication of custom manifolds, reservoirs, and structural supports, ensuring long-term operational integrity and reliability in demanding environments. The specific dimensions provide ample material for various fabrication needs.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from any contaminants that could compromise its integrity or the integrity of the hydraulic system. 2. Accurately measure and mark cut lines according to design specifications, utilizing appropriate cutting tools for stainless steel. 3. Deburr all cut edges to prevent particulate contamination and potential system damage, followed by thorough cleaning.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a cutting tool not designed for stainless steel, leading to excessive heat and potential material degradation. | Employ abrasive or plasma cutting methods specifically calibrated for stainless steel, ensuring adequate coolant is used to manage heat. |
| Failing to properly deburr edges after cutting, introducing sharp fragments into the hydraulic system. | Utilize a high-quality deburring tool or file to meticulously remove all sharp edges and burrs from cut surfaces. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic Manifold Fabrication, Custom Hydraulic Reservoir Construction, Structural Components for Hydraulic Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||