Engineered for demanding pressure and temperature control systems, this 0.300" thick 304 stainless steel sheet offers superior corrosion resistance and mechanical integrity. Precisely sized for reliable component fabrication.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.300" |
| Length | 40" |
| Width | 18" |
Precision-manufactured to tight tolerances, this 304 stainless steel stock sheet measures 0.300 inches in thickness, 40 inches in length, and 18 inches in width. Fabricated from Type 304 stainless steel, it boasts excellent corrosion resistance, particularly against oxidizing acids, and offers good weldability and formability. Its robust mechanical properties make it ideal for high-pressure environments and fluctuating temperature applications where material stability and longevity are paramount. The consistent thickness ensures predictable performance in fabricated components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and surface integrity against project requirements. 2. Prepare the sheet for cutting, bending, or welding according to fabrication drawings and safety protocols. 3. Install the fabricated component ensuring proper sealing and structural support for the intended pressure and temperature conditions.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a lower-grade stainless steel for high-corrosion environments. | Always select 304 stainless steel or higher for applications involving aggressive media or elevated temperatures where corrosion resistance is critical. |
| Inadequate cleaning of the sheet surface before fabrication. | Thoroughly clean the 304 stainless steel sheet to remove oils, dirt, and any contaminants that could affect welding, surface finish, or performance. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pressure vessel fabrication, Heat exchanger components, High-temperature ducting and manifolds.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||