This robust 0.830-inch thick 304 stainless steel stock sheet, measuring 14" x 45", is engineered for high-temperature and corrosive environments within heating and cooling systems.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.830" |
| Length | 14" |
| Width | 45" |
Engineered for reliability and performance, this 304 stainless steel stock sheet offers exceptional strength and corrosion resistance, crucial for demanding heating and cooling applications. With a substantial thickness of 0.830 inches and dimensions of 14" x 45", it's designed to withstand extreme thermal cycling and aggressive media exposure. The inherent properties of 304 stainless steel, including its chromium and nickel content, provide excellent protection against oxidation and pitting, ensuring longevity in heat exchangers, ductwork, and other critical components. Its formability allows for precise fabrication to meet specific system requirements.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure surface is clean and free of debris. 2. Carefully position the sheet according to design specifications. 3. Secure the sheet using appropriate fastening methods (welding, bolting) for the application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using insufficient fastening methods for the application's stress loads. | Consult engineering drawings or material specifications to determine the correct gauge and type of fasteners required for the intended service. |
| Allowing sharp edges to remain after cutting or fabrication. | Thoroughly deburr all cut edges to prevent potential injury during handling and installation, and to avoid stress concentration points. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Heat Exchanger Fabrication, Industrial Oven Linings, High-Temperature Ductwork.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||