Engineered for resilience in demanding environments, this 304 stainless steel stock sheet offers superior corrosion resistance and high tensile strength for critical pulling and lifting applications.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.235" |
| Length | 45" |
| Width | 22" |
Precision-manufactured to tight tolerances, this 304 stainless steel stock sheet measures 0.235 inches in thickness, 45 inches in length, and 22 inches in width. Composed of Austenitic Grade 304 stainless steel, it exhibits excellent resistance to atmospheric corrosion, many organic and inorganic chemicals, and food-processing environments. Its inherent toughness and ductility ensure reliable performance under significant tensile stress and bending forces, making it ideal for fabricating custom rigging components, winch drums, and specialized lifting hardware where integrity and longevity are paramount. The material's non-magnetic properties also contribute to its suitability in sensitive operational contexts.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Assess structural requirements for the intended pulling or lifting application. 2. Fabricate to custom specifications using appropriate cutting, forming, and welding techniques for 304 stainless steel. 3. Integrate fabricated components into the complete pulling or lifting system, ensuring all connections meet relevant safety standards.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel for corrosive environments. | Always specify 304 stainless steel for applications exposed to moisture, chemicals, or saltwater to prevent premature corrosion and failure. |
| Underestimating the required material thickness for load-bearing applications. | Consult engineering load charts and perform stress calculations to ensure the selected sheet thickness adequately supports the anticipated dynamic and static loads. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom winch drum fabrication, Reinforcement plates for rigging hardware, Specialized marine lifting equipment components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||