This 304 stainless steel stock sheet offers exceptional durability and corrosion resistance, making it ideal for demanding pressure and temperature control applications where reliability is paramount.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.949" |
| Length | 34" |
| Width | 33" |
Built to exacting engineering tolerances, this 304 stainless steel stock sheet features a precise thickness of 0.949 inches, a length of 34 inches, and a width of 33 inches. The inherent properties of 304 stainless steel, including its excellent corrosion resistance in various environments and its ability to withstand moderate to high temperatures and pressures, make this sheet a superior choice for fabrication in critical systems. Its high tensile and yield strength ensure structural integrity under stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from contaminants before integration. 2. Precisely cut and form the sheet according to design specifications using appropriate fabrication tools. 3. Securely weld or fasten the formed sheet to the relevant system components, verifying seal integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper edge preparation leading to weld defects. | Thoroughly clean and bevel all edges to be welded according to ASME B16.25 standards. |
| Using standard carbon steel tools for cutting or forming, causing galvanic corrosion. | Utilize dedicated stainless steel tooling and equipment to prevent contamination and maintain material integrity. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pressure vessel fabrication, High-temperature ducting systems, Heat exchanger components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||