This 304 stainless steel stock sheet is engineered for robust performance in critical pressure and temperature control systems. Its superior corrosion resistance and durability ensure reliable operation in demanding industrial environments.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.927" |
| Length | 22" |
| Width | 25" |
Built to exacting engineering tolerances, this 0.927-inch thick sheet of 304 stainless steel boasts precise dimensions of 22 inches in length and 25 inches in width. Characterized by its excellent corrosion resistance, high tensile strength, and moderate temperature endurance (up to 800°C / 1470°F continuous service), it is ideal for fabricating components in chemical processing, food and beverage, and oil and gas industries where medium-duty pressure vessels, heat exchangers, and fluid handling systems are paramount. Its non-magnetic nature and ease of fabrication further enhance its utility.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean and free of contaminants. 2. Position sheet for cutting or forming operations according to design specifications. 3. Secure sheet properly before any machining or welding to prevent movement and ensure dimensional accuracy.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not rated for hardened stainless steel, leading to tool wear and imprecise cuts. | Employ carbide-tipped or high-speed steel cutting tools specifically designed for stainless steel, utilizing appropriate lubrication and feed rates. |
| Inadequate post-weld cleaning, resulting in carbide precipitation and reduced corrosion resistance at heat-affected zones. | Implement thorough pickling and passivation procedures immediately after welding to restore the protective chromium oxide layer. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pressure vessel fabrication, Heat exchanger components, Corrosion-resistant fluid handling systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||