This heavy-gauge 304 stainless steel stock sheet offers superior corrosion resistance and exceptional durability. Engineered for demanding industrial environments, it's the ideal material for custom fabrication in plumbing and janitorial settings.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.395" |
| Length | 28" |
| Width | 25" |
Precision-manufactured to tight tolerances, this 304 stainless steel stock sheet measures 0.395 inches thick, 28 inches in length, and 25 inches in width. Composed of 18% chromium and 8% nickel, it provides excellent resistance to a wide range of corrosive substances and atmospheric conditions, preventing rust and staining. Its robust nature ensures longevity and structural integrity under constant use, making it suitable for fabricating custom work surfaces, splashbacks, containment units, and structural components in high-moisture or chemically active environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Carefully measure and mark desired cut lines on the stock sheet using appropriate layout tools. 2. Utilize industrial-grade cutting equipment (e.g., shear, plasma cutter) suitable for the material thickness, ensuring clean, precise edges. 3. Fabricate and install according to project-specific engineering drawings and applicable building codes, employing appropriate welding, fastening, or mounting techniques.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for thick stainless steel, leading to poor edge quality and potential material damage. | Employ industrial-grade cutting equipment such as a heavy-duty shear, plasma cutter, or waterjet for precise cuts and clean edges. |
| Inadequate surface preparation before welding or joining, resulting in compromised structural integrity and potential corrosion initiation. | Thoroughly degrease and clean all joining surfaces to remove any oil, dirt, or contaminants. Use stainless steel brushes and solvents specifically approved for the material. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom fabrication of worktables and countertops for commercial kitchens and laboratories., Construction of durable splashbacks and wall protection in high-traffic janitorial areas., Manufacturing of specialized containment vessels and structural supports for plumbing systems..
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||