This high-grade 304 stainless steel stock sheet is engineered for demanding pressure and temperature control systems. Its robust construction ensures exceptional durability and resistance to corrosive environments, making it a reliable component for critical applications.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.518" |
| Length | 28" |
| Width | 44" |
Specified by design engineers worldwide, this 304 stainless steel stock sheet offers a nominal thickness of 0.518 inches, with precise dimensions of 28 inches in length and 44 inches in width. Composed of 18% chromium and 8% nickel, it provides excellent corrosion resistance, formability, and weldability, crucial for applications involving elevated pressures and temperatures. Its annealed condition ensures optimal mechanical properties for fabrication and long-term performance in harsh industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet surface is clean and free from contaminants. 2. Accurately measure and cut the sheet to the required dimensions using appropriate metal-cutting tools. 3. Fabricate and install the sheet according to the specific design requirements and safety protocols.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or improperly cut materials. | Always verify and double-check measurements against design specifications before cutting to ensure a precise fit. |
| Inadequate surface preparation leading to poor adhesion or premature corrosion. | Thoroughly clean the sheet surface before any welding, coating, or assembly to remove oils, dirt, and other potential contaminants. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pressure vessel fabrication, High-temperature process equipment components, Heat exchanger plates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||