This robust 304 stainless steel stock sheet is engineered for extreme durability in pulling and lifting operations. Its substantial thickness and corrosion resistance ensure reliable performance in harsh environments.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.999" |
| Length | 27" |
| Width | 19" |
Built to exacting engineering tolerances, this 0.999" thick stock sheet measures 27" in length and 19" in width. Fabricated from premium 304 stainless steel, it offers superior tensile strength, exceptional corrosion resistance to a wide range of chemicals and environments, and excellent weldability. These characteristics make it ideal for constructing custom winch drums, reinforcement plates in heavy machinery, structural components for lifting equipment, and secure mounting bases where structural integrity and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean and free of debris. 2. Precisely align the sheet according to the design specifications. 3. Securely fasten the sheet using appropriately rated hardware and welding techniques as dictated by the application's load requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized fasteners or improper welding procedures. | Always select fasteners with a shear and tensile strength exceeding the expected loads and employ welding techniques suitable for 304 stainless steel to maintain material integrity. |
| Ignoring environmental factors that could compromise stainless steel. | While 304 is highly corrosion-resistant, avoid prolonged contact with chlorides or dissimilar metals in corrosive environments without proper passivation or protective coatings if necessary. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom winch drum fabrication, Reinforcement plates for heavy machinery, Structural components for industrial cranes and hoists.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||