This 0.436-inch thick 304 stainless steel stock sheet offers superior corrosion resistance and strength. Engineered for demanding pressure and temperature control environments, it provides reliable performance and longevity in critical industrial applications.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.436" |
| Length | 42" |
| Width | 44" |
A high-performance industrial component, this 304 stainless steel stock sheet is manufactured to exacting standards. With dimensions of 0.436 inches in thickness, 42 inches in length, and 44 inches in width, it is ideal for fabricating robust pressure vessels, heat exchangers, and components subjected to extreme thermal cycling. The inherent properties of 304 stainless steel, including its excellent weldability, formability, and resistance to a wide range of corrosive media, ensure long-term operational integrity and minimal maintenance requirements in demanding industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Thoroughly clean the sheet surface to remove any contaminants. 2. Precisely cut the sheet to the required dimensions using appropriate cutting tools. 3. Weld or fasten the sheet according to design specifications, ensuring proper joint integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate surface preparation before welding. | Ensure all welding surfaces are meticulously cleaned of oil, grease, and scale to prevent weld defects. |
| Using incorrect cutting tools, leading to material deformation. | Employ cutting tools specifically designed for stainless steel to maintain material integrity and achieve precise cuts. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pressure Vessel Fabrication, Heat Exchanger Components, High-Temperature Piping Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||