Engineered for extreme environments, this 0.779" thick 304 stainless steel sheet offers superior corrosion resistance and thermal stability. Its robust construction ensures longevity in demanding heating and cooling applications.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.779" |
| Length | 40" |
| Width | 23" |
Purpose-built for heavy-duty applications, this 304 stainless steel stock sheet measures 0.779 inches thick, 40 inches in length, and 23 inches in width. Composed of 18% chromium and 8% nickel, it provides excellent resistance to oxidation and general corrosion, making it ideal for high-temperature environments and exposure to various chemical agents. Its substantial gauge ensures structural integrity for components within HVAC systems, heat exchangers, industrial furnaces, and exhaust manifold fabrication where thermal cycling and mechanical stress are significant factors.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the installation area is clean and free of debris. 2. Precisely cut the stainless steel sheet to the required dimensions using appropriate cutting tools. 3. Secure the fabricated component using approved welding or fastening techniques suitable for 304 stainless steel.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel tools which can cause galvanic corrosion. | Employ dedicated stainless steel cutting and fabrication tools to prevent contamination. |
| Inadequate edge preparation leading to weak welds. | Properly bevel and clean all edges before welding to ensure full penetration and strength. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Industrial Heat Exchanger Fabrication, High-Temperature Furnace Linings, HVAC Ductwork and Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||