This 304 stainless steel stock sheet is engineered for robust performance in demanding pulling and lifting scenarios. Its exceptional corrosion resistance and structural integrity ensure reliable operation in harsh industrial environments.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.367" |
| Length | 27" |
| Width | 42" |
A high-performance industrial component, this 0.367" thick stock sheet offers superior strength and durability. Fabricated from premium 304 stainless steel, it boasts excellent corrosion resistance against a wide range of chemicals and environments, making it ideal for marine, chemical processing, and food-grade applications. Its dimensions of 27" in length and 42" in width provide ample material for custom fabrication of specialized pulling and lifting fixtures, such as reinforced mounting plates, custom sheaves, or structural support components. The inherent non-magnetic properties of 304 stainless steel are also beneficial in environments sensitive to magnetic interference.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Securely position the sheet within the fabrication area, ensuring adequate support. 2. Precisely mark and cut the sheet to the required dimensions for the specific pulling or lifting component. 3. Weld or fasten the cut sections using appropriate techniques and fasteners suitable for 304 stainless steel, ensuring structural integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel fasteners which will corrode and compromise the stainless steel assembly. | Always use 304 or 316 stainless steel fasteners to maintain corrosion resistance. |
| Inadequate preparation of welding surfaces, leading to poor weld quality. | Thoroughly clean welding surfaces to remove any grease, oil, or contaminants before welding. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom fabrication of lifting hooks and shackles, Reinforced mounting plates for winches and hoists, Structural components for marine-grade pulling equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||