This 304 stainless steel stock sheet offers superior corrosion resistance for critical hydraulic applications. Its robust construction ensures longevity and reliable performance in demanding environments.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.263" |
| Length | 28" |
| Width | 14" |
Manufactured under strict quality controls, this 304 stainless steel stock sheet measures 0.263 inches in thickness, 28 inches in length, and 14 inches in width. Composed of 18% chromium and 8% nickel, it exhibits excellent resistance to oxidation and corrosion, making it ideal for fluid handling systems where chemical inertness and structural integrity are paramount. This material is well-suited for fabricating hydraulic manifold blocks, custom fittings, and structural components exposed to hydraulic fluids and potential environmental stressors.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material grade against project requirements. 2. Clean surfaces thoroughly to remove any contaminants. 3. Machine or fabricate to precise component specifications using appropriate tooling for stainless steel.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible cutting tools leading to material work hardening. | Employ sharp, high-speed steel or carbide tooling designed for stainless steel, and ensure adequate lubrication. |
| Improper cleaning leading to contamination and premature corrosion. | Utilize non-abrasive cleaning agents and deionized water. Avoid ferrous tools during cleaning and handling to prevent galvanic corrosion. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic Manifold Fabrication, Custom Hydraulic Fitting Construction, Sealing Surface Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||