Engineered from high-grade 304 stainless steel, this stock sheet offers superior corrosion resistance and mechanical strength, ideal for demanding hydraulic environments.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.088" |
| Length | 15" |
| Width | 32" |
Purpose-built for heavy-duty applications, this 0.088-inch thick, 15-inch by 32-inch sheet of 304 stainless steel provides exceptional durability and resistance to corrosive fluids common in hydraulic systems. Its annealed condition ensures good formability and weldability, crucial for fabrication and custom component manufacturing. The inherent strength of 304 stainless steel (typically with a minimum tensile strength of 515 MPa and yield strength of 205 MPa) makes it ideal for pressure vessels, manifold blocks, and protective housings where reliability is paramount. Its non-magnetic properties also contribute to its suitability in sensitive hydraulic circuits.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect sheet for surface defects or damage prior to fabrication. 2. Cut to required dimensions using appropriate metal cutting tools (e.g., shear, plasma cutter). 3. Fabricate components according to design specifications, ensuring proper welding procedures for 304 stainless steel.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible cutting fluids that can cause corrosion. | Utilize cutting fluids specifically recommended for stainless steel to prevent contamination and potential oxidation. |
| Inadequate surface preparation before welding, leading to weak joints. | Thoroughly clean the weld area to remove all contaminants, oils, and oxides to ensure a strong and corrosion-resistant weld. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic Manifold Blocks, Pressure Vessel Fabrication, Protective Housings for Hydraulic Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||