This robust 304 stainless steel stock sheet offers exceptional corrosion resistance and formability. Precisely manufactured to meet stringent industrial standards, it's ideal for a wide range of demanding fabrication and construction applications.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.216" |
| Length | 44" |
| Width | 13" |
Built to exacting engineering tolerances, this 304 stainless steel stock sheet measures 0.216 inches (approximately 5.49 mm) in thickness, 44 inches (approximately 1118 mm) in length, and 13 inches (approximately 330 mm) in width. Composed of an alloy with a minimum of 18% chromium and 8% nickel, it exhibits superior resistance to oxidation and many corrosive media. Its excellent weldability and formability make it suitable for manufacturing custom components, structural supports, and applications requiring a sterile or hygienic surface.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper safety equipment (gloves, eye protection) is worn. 2. Precisely measure and mark cut lines according to design specifications. 3. Utilize appropriate cutting tools (e.g., abrasive cut-off saw, plasma cutter) for precise fabrication.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools that can lead to burring or material damage. | Employ tools specifically designed for cutting stainless steel to ensure clean, precise edges. |
| Neglecting to deburr edges after cutting, which can create safety hazards and affect subsequent assembly. | Thoroughly deburr all cut edges with a file or grinder to remove sharp points. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom fabrication and welding projects, Structural components in corrosive environments, Food service equipment and sanitary applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||