This 304 stainless steel stock sheet provides exceptional corrosion and temperature resistance for critical pressure and temperature control systems. Its robust construction ensures long-term reliability in demanding environments.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.275" |
| Length | 41" |
| Width | 38" |
Manufactured under strict quality controls, this 0.275-inch thick 304 stainless steel sheet offers superior strength and corrosion resistance, essential for high-pressure and high-temperature applications. The alloy's composition (minimum 18% chromium, 8% nickel) ensures excellent performance in oxidizing and reducing environments, preventing intergranular corrosion. Its dimensions of 41 inches by 38 inches provide ample material for fabricating components such as heat exchangers, pressure vessels, valve bodies, and control panel housings, meeting stringent industry standards for safety and longevity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Carefully position the sheet, aligning with pre-drilled holes or cutouts as per design specifications. 3. Secure the sheet using appropriate fasteners, ensuring even pressure distribution to prevent warping.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper fastener selection leading to galvanic corrosion. | Utilize fasteners made from compatible materials, ideally 304 stainless steel or higher-grade alloys, to prevent dissimilar metal corrosion. |
| Over-tightening fasteners, causing stress risers and potential sheet deformation. | Apply fasteners to the recommended torque specifications using a calibrated torque wrench. Distribute fastening points evenly. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Heat Exchanger Fabrication, Pressure Vessel Construction, High-Temperature Ducting.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||