Engineered for extreme hydraulic environments, this 304 stainless steel sheet offers superior corrosion resistance and mechanical integrity. Its robust dimensions ensure reliability in critical fluid power applications.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.564" |
| Length | 40" |
| Width | 41" |
Purpose-built for heavy-duty applications, this 0.564" thick, 40" x 41" sheet of 304 stainless steel provides exceptional durability and resistance to harsh chemicals and high pressures common in hydraulic systems. The austenitic 304 grade offers excellent formability and weldability, making it ideal for fabricating custom hydraulic manifolds, reservoirs, and structural components. Its inherent corrosion resistance ensures longevity in wet, corrosive environments, preventing premature failure and maintaining system efficiency. This material is meticulously manufactured to meet stringent industrial standards for hydraulic fluid containment and power transmission.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean and free of contaminants. 2. Utilize appropriate welding or fastening techniques for 304 stainless steel, following industry best practices. 3. Perform hydrostatic testing to verify seal integrity and system performance before full operation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel in corrosive hydraulic fluid environments. | Always specify 304 stainless steel for its superior corrosion resistance, preventing premature material degradation and potential leaks. |
| Inadequate surface preparation before welding or assembly. | Thoroughly clean all surfaces to remove oils, grease, and any foreign debris to ensure a strong, leak-free bond. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic Manifold Fabrication, High-Pressure Hydraulic Reservoir Construction, Corrosion-Resistant Hydraulic Component Housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||