Engineered for robust hydraulic systems, this 304 stainless steel stock sheet offers superior corrosion resistance and mechanical strength. Its precise dimensions ensure seamless integration into critical fluid power components.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.148" |
| Length | 31" |
| Width | 36" |
Trusted by engineers across multiple sectors, this 0.148-inch thick, 304 stainless steel stock sheet measures 31 inches by 36 inches. The inherent properties of 304 stainless steel, including its excellent resistance to a wide range of corrosive media and its good formability, make it ideal for constructing hydraulic manifolds, fluid reservoirs, and protective casings. Its non-magnetic nature and hygienic surface further contribute to its suitability in demanding environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from contaminants. 2. Accurately cut to the required dimensions using appropriate fabrication tools. 3. Integrate into the hydraulic assembly following design specifications and welding/fastening procedures.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to edge deformation or work hardening. | Employ high-quality cutting tools (e.g., laser, plasma, or abrasive waterjet) specifically designed for stainless steel, and maintain appropriate speeds and feeds. |
| Insufficient cleaning before welding, resulting in weld contamination and compromised integrity. | Thoroughly degrease and deoxidize the weld area using stainless steel-specific cleaning agents and brushes. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic Manifold Blocks, Fluid Reservoir Fabrication, Hydraulic Component Housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||