This robust 304 stainless steel stock sheet is engineered for high-strength pulling and lifting applications. Its substantial gauge and corrosion resistance ensure long-term performance in harsh environments.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.347" |
| Length | 41" |
| Width | 27" |
Engineered for reliability and performance, this 304 stainless steel stock sheet offers exceptional durability for demanding pulling and lifting operations. Measuring 0.347 inches thick, 41 inches in length, and 27 inches in width, it provides a significant surface area and structural integrity. The inherent properties of 304 stainless steel, including its excellent corrosion resistance to a wide range of atmospheric and chemical agents, make it ideal for marine, industrial, and food processing environments. This material is also non-magnetic and exhibits good weldability, further enhancing its versatility for custom fabrication in critical lifting equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Assess the intended mounting points and ensure they are structurally sound. 2. Mark the sheet according to the required configuration and drill pilot holes if necessary. 3. Securely fasten the sheet using appropriate grade hardware and load-rated anchors.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or low-grade fasteners for attachment. | Always utilize fasteners with a tensile strength and material composition suitable for the intended load and environmental exposure, ideally matching or exceeding the sheet's grade. |
| Overlooking the need for proper edge preparation before welding or bending. | Ensure edges are clean, free from mill scale, and appropriately beveled or radiused according to fabrication standards to prevent stress concentrations and ensure weld integrity. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom winch drum reinforcement, Heavy-duty anchor points for rigging, Structural plates for lifting equipment fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||