This 304 stainless steel stock sheet is engineered for exceptional durability in demanding hydraulic systems. Its robust construction ensures long-term performance and reliability under high pressure and corrosive conditions.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.874" |
| Length | 44" |
| Width | 33" |
A high-performance industrial component, this 0.874-inch thick 304 stainless steel stock sheet offers superior tensile strength and excellent corrosion resistance, critical for hydraulic fluid containment and structural integrity. The 44-inch length and 33-inch width provide ample material for custom fabrication of components such as manifold blocks, pump housings, and pressure vessels. 304 stainless steel's austenitic structure ensures non-magnetic properties and weldability, making it suitable for a wide range of hydraulic fluid types and operating environments, including marine and chemical processing.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting and shaping equipment is calibrated for precise dimensions as per the hydraulic system design. 2. Thoroughly clean all surfaces of the stainless steel sheet to remove any contaminants prior to welding or assembly. 3. Integrate the fabricated components with the existing hydraulic system, adhering strictly to pressure and sealing specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel in corrosive hydraulic environments. | Always specify 304 or higher grade stainless steel for hydraulic components exposed to corrosive fluids or atmospheres to prevent premature failure. |
| Insufficient material thickness for pressure ratings. | Verify that the selected sheet thickness meets or exceeds the maximum anticipated operating pressure and safety factors of the hydraulic system. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic Manifold Blocks, Pump and Valve Housings, Pressure Vessel Fabrication, Seawater Hydraulic Systems, Chemical Processing Hydraulics.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||