Engineered for robust hydraulic systems, this 0.469" thick 304 stainless steel sheet offers exceptional corrosion resistance and mechanical strength for critical fluid power applications.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.469" |
| Length | 43" |
| Width | 19" |
Trusted by engineers across multiple sectors, this 304 stainless steel stock sheet, measuring 0.469 inches in thickness, 43 inches in length, and 19 inches in width, is manufactured to meet stringent hydraulic system requirements. Its inherent passivation layer provides superior resistance to a wide range of corrosive media commonly found in industrial fluid power. The material's excellent formability and weldability allow for custom fabrication of manifolds, tanks, and structural components, ensuring long-term operational integrity in demanding environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify dimensions and material grade against project specifications. 2. Clean the sheet surface to remove any contaminants that could compromise hydraulic fluid purity. 3. Fabricate and integrate into the hydraulic system according to approved engineering drawings and safety protocols.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower-grade steel not resistant to hydraulic fluids. | Always specify and verify 304 stainless steel for its proven corrosion resistance in hydraulic environments. |
| Improper cleaning leading to particulate contamination. | Thoroughly clean all surfaces before installation to prevent system damage. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic Manifold Fabrication, Hydraulic Reservoir Construction, Corrosion-Resistant Hydraulic Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||