Engineered for demanding hydraulic applications, this 304 stainless steel stock sheet offers exceptional corrosion resistance and mechanical integrity, ensuring reliable performance in harsh environments.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.468" |
| Length | 26" |
| Width | 19" |
Built to exacting engineering tolerances, this 0.468-inch thick, 26-inch long, and 19-inch wide stock sheet is manufactured from premium 304 stainless steel. This austenitic alloy exhibits excellent resistance to a wide range of corrosive media, making it ideal for hydraulic manifold blocks, valve bodies, and structural components in corrosive or high-pressure fluid systems. Its superior formability and weldability facilitate complex machining and assembly processes, while its inherent strength ensures long-term operational reliability and safety under dynamic stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify dimensions and material grade against project specifications. 2. Clean the sheet surface thoroughly to remove any contaminants before machining. 3. Employ appropriate machining techniques for stainless steel to achieve desired geometry and surface finish.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel for corrosive hydraulic fluids. | Always select 304 stainless steel or higher grades for applications involving corrosive media to prevent premature degradation and system failure. |
| Improper machining speeds and feeds leading to work hardening. | Utilize slow to moderate speeds and generous feeds with appropriate cutting fluids when machining 304 stainless steel to minimize work hardening and ensure tool life. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic manifold fabrication, Valve block construction, Corrosion-resistant hydraulic components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||