This 304 stainless steel stock sheet offers superior corrosion resistance and durability, making it ideal for high-traffic plumbing and janitorial environments. Its robust construction ensures longevity and reliable performance in demanding applications.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.228" |
| Length | 38" |
| Width | 14" |
Trusted by engineers across multiple sectors, this 304 stainless steel stock sheet is engineered for exceptional performance in corrosive environments. Measuring 0.228 inches thick, 38 inches in length, and 14 inches in width, it provides a substantial surface area for fabrication. Composed of 18% chromium and 8% nickel, this austenitic stainless steel alloy exhibits excellent resistance to oxidation and a wide range of corrosive agents, ensuring product integrity and longevity in plumbing fixtures, drainage systems, and janitorial equipment where hygiene and sanitation are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Carefully measure and mark cut lines on the sheet based on project requirements. 2. Utilize appropriate cutting tools (e.g., shears, plasma cutter) for precise fabrication, ensuring safety protocols are followed. 3. Smooth all cut edges to remove burrs and sharp points before further assembly or installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel cutting tools which can lead to iron contamination and subsequent rust spots. | Employ dedicated stainless steel cutting tools or ensure thorough cleaning of tools before and after use. |
| Improper handling leading to scratches or dents, which can compromise the aesthetic and protective oxide layer. | Handle sheets with care, utilizing protective films or gloves, and avoid dragging across rough surfaces. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom fabricated drain pans and trays, Protective wall panels in high-traffic janitorial areas, Components for specialized plumbing fixtures and equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||