This robust 1.000" thick 304 stainless steel sheet offers exceptional durability and corrosion resistance. Engineered for critical pressure and temperature control systems, it ensures reliable performance in demanding environments.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 1.000" |
| Length | 42" |
| Width | 45" |
A high-performance industrial component, this 304 stainless steel stock sheet is precisely manufactured to exacting standards. With a substantial thickness of 1.000", a length of 42", and a width of 45", it provides a significant surface area for structural integrity and process interfacing. The inherent properties of 304 stainless steel, including its excellent corrosion resistance to a wide range of media, superior tensile strength at elevated temperatures, and non-magnetic nature, make it the material of choice for applications requiring consistent operation under high pressure and fluctuating thermal cycles. Its fine-grained structure and work-hardening characteristics also contribute to its longevity and resistance to mechanical fatigue.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free from contaminants. 2. Accurately position the 304 stainless steel sheet according to design specifications. 3. Secure the sheet using appropriate fasteners (e.g., bolts, welding) designed for the intended load and environmental conditions, adhering to recommended torque values or welding procedures.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to premature corrosion at contact points. | Thoroughly degrease and clean the sheet and mounting surface before installation. Use compatible cleaning agents and avoid abrasive materials that could damage the passive layer. |
| Over-tightening fasteners, causing deformation or stress concentrations in the sheet. | Utilize a calibrated torque wrench and follow manufacturer-recommended torque specifications for the chosen fasteners to prevent material stress and potential failure. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: High-pressure vessel fabrication, Heat exchanger components, Cryogenic system insulation barriers, Chemical processing equipment linings, Corrosive fluid containment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||