Engineered for robust performance, this 304 stainless steel stock sheet offers exceptional strength and corrosion resistance. Its substantial dimensions and material composition make it ideal for rigorous pulling and lifting tasks in challenging environments.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.989" |
| Length | 32" |
| Width | 33" |
Built to exacting engineering tolerances, this 0.989-inch thick stock sheet features precise dimensions of 32 inches in length and 33 inches in width. Fabricated from AISI 304 stainless steel, it boasts a superior tensile strength and yield strength, ensuring integrity under extreme load. Its inherent resistance to corrosion, pitting, and crevice attack from chlorides and various industrial chemicals makes it suitable for marine, chemical processing, and food service environments where hygiene and durability are paramount. The material's non-magnetic properties also contribute to its versatility in specialized applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect sheet for any shipping damage or defects prior to installation. 2. Ensure mounting surfaces are clean, level, and capable of supporting the intended load. 3. Securely fasten the sheet using appropriate grade stainless steel hardware and load-rated anchoring systems.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or low-grade fasteners that do not match the load capacity of the stainless steel sheet. | Always use grade-appropriate, high-tensile stainless steel fasteners and anchoring systems rated for the anticipated dynamic and static loads. |
| Installing the sheet on uneven or structurally unsound surfaces, leading to premature failure. | Verify that all mounting surfaces are planar, free of debris, and possess adequate structural integrity to safely distribute the imposed forces. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Heavy-duty lifting points and structural reinforcement, Custom pulling apparatus and winch bases, Marine hardware and industrial deck plates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||