This robust 0.986-inch thick 304 stainless steel stock sheet, measuring 19" x 12", offers superior corrosion resistance and strength. Engineered for critical hydraulic systems and demanding environments, it ensures reliability and longevity.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.986" |
| Length | 19" |
| Width | 12" |
A proven choice for industrial professionals, this 0.986" thick, 19" long, and 12" wide 304 stainless steel sheet is meticulously manufactured to meet stringent hydraulic system requirements. Its 304 grade stainless steel composition provides excellent resistance to corrosion and oxidation, crucial for fluid containment and component integrity in aggressive environments. The substantial thickness ensures high tensile strength and structural stability, making it ideal for pressure vessels, manifold blocks, and custom hydraulic component fabrication where performance under load is paramount. Rigorous quality control ensures dimensional accuracy and material consistency for seamless integration into complex hydraulic assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material compatibility with hydraulic fluid and operating pressures. 2. Precisely cut sheet to required dimensions using appropriate tooling for stainless steel. 3. Deburr all edges thoroughly to prevent fluid contamination and potential component damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel in corrosive hydraulic environments. | Always select 304 stainless steel for its inherent corrosion resistance, especially when exposed to moisture or aggressive fluids. |
| Improper edge finishing leading to burrs. | Thoroughly deburr all cut edges to prevent particulate contamination of the hydraulic system and potential leaks. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic Manifold Blocks, Custom Hydraulic Component Fabrication, Pressure Vessels and Reservoirs.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||