This 304 stainless steel stock sheet is engineered for critical hydraulic systems. Its robust construction and premium material ensure exceptional durability and reliability in corrosive environments.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.976" |
| Length | 21" |
| Width | 29" |
Precision-manufactured to tight tolerances, this 0.976-inch thick sheet measures 21 inches in length and 29 inches in width. Fabricated from 304 stainless steel, it offers excellent corrosion resistance to a wide range of chemicals and fluids commonly found in hydraulic systems. Its high tensile strength and formability make it suitable for custom fabrication of hydraulic manifold blocks, fluid reservoirs, and structural components where resistance to pitting, crevice corrosion, and general corrosion is paramount. The material's inertness also prevents contamination of hydraulic fluids.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of contaminants. 2. Carefully position the sheet, aligning with pre-drilled holes or mounting points. 3. Secure the sheet using appropriate fasteners, ensuring even torque distribution to avoid deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to premature corrosion. | Thoroughly clean and degrease the mounting area and the sheet surface before installation. |
| Over-tightening fasteners, causing sheet distortion or stress risers. | Utilize a calibrated torque wrench and follow recommended torque specifications for the chosen fasteners. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic Manifold Fabrication, Corrosive Fluid Containment, Structural Components in Marine Hydraulics.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||