This high-grade 304 stainless steel stock sheet offers superior corrosion resistance and formability. Precisely manufactured for demanding industrial applications within the heating and cooling sector.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.951" |
| Length | 21" |
| Width | 29" |
Specified by design engineers worldwide, this 0.951" thick 304 stainless steel sheet (21" x 29") provides exceptional tensile strength and creep resistance at elevated temperatures, making it ideal for heat exchangers, furnace components, and high-temperature ducting. Its 18/8 chromium-nickel composition ensures excellent resistance to oxidation and general corrosion, crucial for environments exposed to moisture and corrosive agents. The material exhibits good weldability and fabrication characteristics, allowing for complex component creation in critical heating and cooling systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from contaminants. 2. Accurately cut to the required dimensions using appropriate fabrication tools. 3. Install according to system design specifications, ensuring proper sealing and structural integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower-grade stainless steel for corrosive environments. | Always specify 304 or higher stainless steel for applications involving exposure to acids, chlorides, or high humidity to prevent premature corrosion. |
| Inadequate consideration of thermal expansion during design. | Factor in the coefficient of thermal expansion for 304 stainless steel (approximately 16.0 µm/m°C) when designing assemblies to prevent stress and deformation. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Heat Exchanger Components, Furnace Linings and Casings, High-Temperature Ductwork.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||