This 304 stainless steel stock sheet offers exceptional corrosion resistance and formability, making it a superior choice for fabricating robust components in challenging heating and cooling environments.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.942" |
| Length | 46" |
| Width | 23" |
Precision-manufactured to tight tolerances, this 0.942-inch thick 304 stainless steel sheet measures 46 inches in length and 23 inches in width. Composed of 18% chromium and 8% nickel, it provides excellent resistance to oxidation and a wide range of corrosive media, essential for applications exposed to high temperatures and diverse chemical environments. Its inherent strength and durability ensure long-term performance under thermal cycling and mechanical stress. This material is ideal for fabricating heat exchangers, ductwork, industrial oven components, and specialized HVAC systems where reliability and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the installation area is clean and free of contaminants. 2. Carefully position the sheet according to design specifications. 3. Secure the sheet using appropriate fastening methods (e.g., welding, bolting) ensuring proper structural integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower grade stainless steel for corrosive environments. | Always specify 304 or higher grade stainless steel for applications involving acids, chlorides, or high-temperature oxidation. |
| Inadequate support leading to deformation under load. | Implement sufficient support structures during installation to maintain the sheet's intended geometry and prevent bowing or sagging. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Heat Exchanger Fabrication, Industrial Oven Linings, HVAC Ducting Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||