This robust 304 stainless steel stock sheet is engineered for superior performance in critical heating and cooling systems. Its substantial gauge and high-grade material ensure longevity and reliability under demanding operational conditions.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.918" |
| Length | 48" |
| Width | 29" |
Built to exacting engineering tolerances, this 0.918-inch thick sheet offers exceptional dimensional stability. Composed of 304 stainless steel, it boasts a minimum tensile strength of 515 MPa and yield strength of 205 MPa, providing superior corrosion resistance against a wide range of chemicals and environments. The 48-inch length and 29-inch width configuration is optimized for integration into heat exchangers, ductwork, furnace components, and other high-temperature or corrosive fluid handling systems where material integrity is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and surface integrity prior to cutting or shaping. 2. Employ appropriate cutting tools (e.g., waterjet, plasma cutter, or shear) designed for thick stainless steel. 3. Securely fasten the sheet using compatible fasteners or welding procedures suitable for 304 stainless steel.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel cutting tools which can lead to carbide precipitation and reduced corrosion resistance. | Utilize tools specifically designed for stainless steel, ensuring proper lubrication and cooling to prevent localized heating. |
| Inadequate preparation of joining surfaces, resulting in weak or porous welds. | Thoroughly degrease and clean all joining surfaces. For welding, use appropriate filler materials and shielded gas (e.g., Argon) to maintain material integrity. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Heat Exchanger Fabrication, High-Temperature Ducting, Furnace and Boiler Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||