This robust 304 Stainless Steel stock sheet, measuring 0.910" thick, 12" wide, and 33" long, is engineered for superior performance in critical pressure and temperature control environments.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.910" |
| Length | 12" |
| Width | 33" |
Engineered for reliability and performance, this 304 Stainless Steel stock sheet offers exceptional corrosion resistance, mechanical strength, and thermal stability. Its precise dimensions of 0.910" thickness, 12" width, and 33" length make it suitable for fabricating robust components in high-pressure systems, heat exchangers, and industrial ovens. The austenitic structure of 304 stainless steel ensures excellent weldability and formability, crucial for custom pressure vessel construction and specialized temperature regulation apparatus. This material is compliant with industry standards for pressure containment, guaranteeing integrity under extreme operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet surface is clean and free from contaminants before fabrication. 2. Precisely cut and form the sheet to the required component specifications using appropriate metalworking techniques. 3. Weld or fasten the formed components according to pressure vessel design codes and best practices for stainless steel.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using insufficient weld filler material, leading to potential joint porosity and reduced strength. | Select and use a weld filler material compatible with 304 stainless steel, ensuring proper penetration and complete fusion according to welding procedure specifications. |
| Improper cleaning after fabrication, leaving behind contaminants that can initiate corrosion. | Thoroughly clean all surfaces with non-abrasive materials and appropriate solvents after fabrication and welding to remove any residual flux, slag, or oils. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pressure Vessel Fabrication, Heat Exchanger Components, High-Temperature Industrial Ovens.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||