This 0.820" thick 304 stainless steel sheet is precisely manufactured for robust heating and cooling systems. Its superior corrosion resistance ensures longevity in demanding environments.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.820" |
| Length | 22" |
| Width | 48" |
Engineered for reliability and performance, this 304 stainless steel stock sheet boasts exceptional strength and formability, crucial for fabricating components within complex heating and cooling infrastructure. Its 0.820" thickness provides substantial rigidity for heat exchangers, ductwork, and structural supports. As a 304 grade, it offers excellent resistance to oxidation and pitting corrosion, making it ideal for applications involving elevated temperatures and moisture, ensuring operational integrity and extending service life in HVAC systems, industrial furnaces, and heat recovery units.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and condition prior to cutting. 2. Utilize appropriate cutting tools for 0.820" thick stainless steel. 3. Ensure all fabricated components are cleaned to remove any residual contaminants before installation into the system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools leading to edge deformation. | Employ shear blades, plasma cutters, or waterjet systems specifically designed for thick stainless steel to maintain edge integrity. |
| Allowing surface contamination during fabrication. | Implement clean fabrication practices, including the use of non-marking tools and protective coverings to prevent scratching and chemical contamination. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Heat Exchanger Fabrication, Industrial Furnace Linings, HVAC Ductwork Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||