This robust 304 stainless steel stock sheet is engineered for demanding heating and cooling systems, offering superior corrosion resistance and structural integrity for critical applications.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.809" |
| Length | 23" |
| Width | 46" |
A high-performance industrial component, this 304 stainless steel stock sheet measures 0.809 inches in thickness, 23 inches in length, and 46 inches in width. Fabricated from Type 304 stainless steel, it boasts exceptional resistance to oxidation and a wide range of corrosive environments, making it ideal for high-temperature and chemical exposure. Its inherent strength and durability ensure reliable performance in thermal management systems, heat exchangers, and ductwork, contributing to extended service life and operational efficiency in industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the installation area is clean and free of debris. 2. Carefully position the 304 stainless steel sheet according to system design specifications. 3. Secure the sheet using appropriate welding or fastening techniques, maintaining structural integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect fastening methods that compromise the sheet's corrosion resistance. | Employ stainless steel fasteners or approved welding procedures compatible with 304 grade stainless steel to maintain material integrity. |
| Exposing the sheet to incompatible chemicals during installation or operation. | Consult material compatibility charts to ensure the environment and any substances the sheet will contact are suitable for 304 stainless steel. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Heat Exchanger Components, Industrial Ductwork, Furnace Linings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||