This 0.806" thick 304 stainless steel stock sheet is engineered for superior performance in demanding heating and cooling environments. Its robust construction ensures longevity and resistance to corrosion, making it ideal for critical components.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.806" |
| Length | 30" |
| Width | 25" |
Built to exacting engineering tolerances, this 304 stainless steel stock sheet measures 0.806 inches in thickness, 30 inches in length, and 25 inches in width. Composed of a chromium-nickel alloy, it exhibits excellent corrosion resistance, high tensile strength, and formability, making it suitable for fabricating heat exchangers, flue liners, ductwork, and other components exposed to elevated temperatures and corrosive media. The material's inherent durability ensures structural integrity under thermal cycling and stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of contaminants. 2. Fabricate or form the sheet according to design specifications. 3. Securely install the fabricated component in its intended heating or cooling system application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using thinner gauge material for high-stress applications. | Always verify material thickness against the engineering design requirements for the specific application to ensure adequate structural integrity and thermal performance. |
| Inadequate cleaning of the surface before welding or forming. | Thoroughly degrease and clean the 304 stainless steel surface using appropriate solvents to prevent contamination that can compromise corrosion resistance and weld quality. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Heat Exchanger Fabrication, Industrial Oven Linings, High-Temperature Ductwork.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||