This 0.796" thick 304 stainless steel sheet offers exceptional strength and corrosion resistance, making it a critical component for robust hydraulic systems. Its precise dimensions ensure seamless integration and reliable performance under demanding conditions.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.796" |
| Length | 36" |
| Width | 21" |
Engineered for reliability and performance, this 304 stainless steel stock sheet provides exceptional structural integrity for hydraulic applications. Measuring 0.796 inches in thickness, 36 inches in length, and 21 inches in width, it meets stringent industry standards for material properties. The 304 grade offers superior resistance to corrosion and oxidation, crucial for environments exposed to fluids and varying pressures. This material's high tensile strength and formability allow for precise fabrication of hydraulic components, ensuring leak-proof seals and sustained operational efficiency in high-pressure systems. Its non-magnetic properties further enhance its suitability for sensitive hydraulic circuits.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material certification against project specifications. 2. Prepare cutting and forming equipment calibrated for 0.796" thick stainless steel. 3. Fabricate hydraulic manifold or structural components following precise engineering drawings, ensuring all edges are deburred.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel for hydraulic manifold fabrication. | Always specify and use 304 or 316 stainless steel for hydraulic components to prevent premature corrosion and system failure. |
| Inadequate deburring after cutting or machining. | Thoroughly deburr all edges after fabrication to prevent particulate contamination within the hydraulic fluid, which can damage seals and pumps. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic Manifold Blocks, High-Pressure Fluid Connectors, Corrosion-Resistant Hydraulic Housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||