Engineered for demanding environments, this 304 stainless steel stock sheet offers superior corrosion resistance and hygienic properties. Ideal for fabricating custom plumbing fixtures and janitorial equipment where durability is paramount.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.767" |
| Length | 40" |
| Width | 12" |
Specified by design engineers worldwide, this 304 stainless steel stock sheet boasts a substantial 0.767" (19.48 mm) thickness, ensuring exceptional rigidity and load-bearing capacity. Its 40" (1016 mm) length and 12" (304.8 mm) width provide ample material for custom fabrication. Composed of 18% chromium and 8% nickel, 304 stainless steel offers excellent resistance to a wide range of corrosive media commonly encountered in plumbing and janitorial settings, including water, mild acids, and alkalis. Its non-porous surface inhibits bacterial growth, making it a hygienic choice for food service areas, laboratories, and healthcare facilities.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean and prepare the substrate thoroughly, ensuring it is free from debris and moisture. 2. Accurately measure and cut the 304 stainless steel sheet to the required dimensions using appropriate cutting tools (e.g., abrasive cut-off wheel, plasma cutter). 3. Securely fasten the fabricated component to the intended structure using corrosion-resistant fasteners, ensuring proper alignment and structural integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel fasteners that can lead to galvanic corrosion. | Always use 304 stainless steel fasteners or other compatible corrosion-resistant fasteners to prevent galvanic corrosion. |
| Improper handling leading to scratches or dents that can compromise the surface finish and corrosion resistance. | Handle the sheet with care using gloves and avoid dragging it across rough surfaces. Use protective film if necessary during fabrication. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom fabricated sink basins and countertops, Durable splash guards and backsplashes, Janitorial equipment housings and components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||