This 304 stainless steel stock sheet is engineered for superior performance and longevity in demanding hydraulic applications. Its robust construction ensures reliability under pressure and in corrosive environments.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.737" |
| Length | 44" |
| Width | 25" |
Designed for demanding industrial environments, this 304 stainless steel stock sheet offers exceptional corrosion resistance and mechanical strength, ideal for hydraulic system components. Measuring 0.737 inches in thickness, 44 inches in length, and 25 inches in width, it meets stringent industry standards for material integrity. The inherent properties of 304 stainless steel, including its high chromium and nickel content, provide excellent resistance to a wide range of chemicals and atmospheric conditions, preventing galvanic corrosion and ensuring extended service life in wet or chemically active hydraulic fluid systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material compatibility with hydraulic fluid and operating environment. 2. Ensure all cutting and machining operations maintain surface integrity to prevent stress corrosion cracking. 3. Properly deburr all edges to prevent fluid contamination and potential seal damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible cleaning agents that can cause pitting or staining. | Utilize only approved, non-chlorinated cleaning solutions and thoroughly rinse with deionized water. |
| Improper welding procedures leading to carbide precipitation and reduced corrosion resistance. | Employ certified welding techniques for 304 stainless steel, utilizing appropriate filler materials and post-weld heat treatments if necessary. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic manifold blocks, Pressure vessel components, Custom hydraulic fitting fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||