This robust 304 stainless steel stock sheet provides superior corrosion resistance and durability, making it an exceptional choice for demanding industrial heating and cooling systems. Its substantial thickness ensures structural integrity for critical components.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.713" |
| Length | 17" |
| Width | 26" |
Engineered for reliability and performance, this 304 stainless steel stock sheet offers a significant material thickness of 0.713 inches, a precise length of 17 inches, and a width of 26 inches. Composed of Austenitic Grade 304, it exhibits excellent resistance to oxidation and corrosion, crucial for environments exposed to high temperatures and aggressive media commonly found in HVAC, heat exchangers, and industrial furnace construction. The inherent strength and formability of this material allow for fabrication into complex shapes while maintaining its structural integrity under thermal cycling and mechanical stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of any contaminants that could compromise weld integrity or surface finish. 2. Precisely cut the sheet to the required dimensions using appropriate metalworking tools, adhering to design specifications. 3. Install the fabricated component into the heating or cooling system, ensuring secure fastening and proper sealing to prevent leaks.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cutting technique leading to burrs or deformed edges. | Utilize high-quality cutting tools designed for thick stainless steel and deburr edges thoroughly after cutting. |
| Selecting insufficient material thickness for high-pressure or high-temperature applications. | Verify that the 0.713" thickness meets or exceeds the pressure and temperature requirements of the intended application, consulting engineering calculations if necessary. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Heat Exchanger Components, Industrial Furnace Linings, HVAC Ductwork and Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||