Engineered for extreme environments, this 304 stainless steel stock sheet provides exceptional thermal conductivity and superior corrosion resistance, making it ideal for critical heating and cooling systems.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.684" |
| Length | 31" |
| Width | 18" |
A high-performance industrial component, this 304 stainless steel stock sheet boasts a robust thickness of 0.684 inches, a substantial length of 31 inches, and a width of 18 inches. Fabricated from premium 304 stainless steel, it offers excellent tensile strength and formability, coupled with outstanding resistance to oxidation and a wide spectrum of corrosive media commonly encountered in heating and cooling infrastructure. Its non-magnetic properties and inert surface ensure product integrity and prevent contamination, crucial for high-purity and demanding thermal management systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the sheet thoroughly to remove any surface contaminants. 2. Precisely cut the sheet to the required dimensions using appropriate metalworking tools. 3. Securely fasten the cut sheet into the designated heating or cooling system component, ensuring proper sealing and structural integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using improper cutting tools, leading to burrs or deformation. | Employ sharp, high-quality metal cutting blades specifically designed for stainless steel to ensure clean, precise cuts. |
| Inadequate surface preparation before installation. | Thoroughly degrease and clean all surfaces that will come into contact with the sheet to prevent adhesion issues and ensure optimal thermal transfer. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Heat Exchanger Components, Furnace Linings, Ductwork for High-Temperature Air.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||