Engineered for resilience, this 304 stainless steel stock sheet offers exceptional corrosion resistance and strength, making it ideal for high-pressure hydraulic applications where material integrity is paramount.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.667" |
| Length | 24" |
| Width | 27" |
A high-performance industrial component, this 304 stainless steel stock sheet measures 0.667 inches in thickness, 24 inches in length, and 27 inches in width. Fabricated from AISI 304 stainless steel, it provides superior resistance to a wide range of corrosive media, including water, many organic and inorganic chemicals, and oxidizing agents. Its excellent formability and weldability allow for precise fabrication into complex hydraulic manifold blocks, custom fittings, and structural components. The material's inherent strength and durability ensure long-term performance and reliability in demanding hydraulic environments, preventing premature failure due to environmental degradation or stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from contaminants before fabrication. 2. Precisely cut and machine the sheet according to hydraulic design specifications. 3. Implement appropriate welding and finishing techniques to maintain material integrity and corrosion resistance.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower-grade steel for hydraulic components exposed to corrosive fluids. | Always specify and utilize 304 stainless steel or equivalent for its proven corrosion resistance and material strength in hydraulic systems. |
| Inadequate post-fabrication cleaning, leading to residual stress or contamination. | Thoroughly clean and inspect all fabricated components to remove welding byproducts and ensure a pristine surface finish for optimal hydraulic fluid compatibility. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic Manifold Blocks, Custom Hydraulic Fittings and Adapters, Corrosion-Resistant Hydraulic System Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||