High-performance 304 stainless steel sheet, engineered for demanding pressure and temperature control environments. Offers superior corrosion resistance and durability for critical applications.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.661" |
| Length | 25" |
| Width | 14" |
Precision-manufactured to tight tolerances, this 0.661-inch thick 304 stainless steel sheet boasts dimensions of 25 inches in length and 14 inches in width. The 304 alloy provides an optimal balance of corrosion resistance, weldability, and formability, making it ideal for fabricating components in high-pressure systems, heat exchangers, and temperature regulation assemblies. Its robust nature ensures longevity and performance under extreme operating conditions. Compliance with relevant ASTM standards is ensured during the manufacturing process.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free from contaminants. 2. Carefully position the stock sheet according to design specifications, aligning all mounting points. 3. Secure the sheet using appropriate fasteners, ensuring even pressure distribution to prevent deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to premature corrosion. | Thoroughly degrease and clean the sheet and mating surfaces before installation. |
| Over-tightening fasteners, causing stress concentrations and potential cracking. | Use torque-controlled fastening methods, adhering to specified torque values for the application. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pressure vessel fabrication, Heat exchanger components, Temperature control system housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||