This robust 304 stainless steel stock sheet offers superior corrosion resistance and formability for a wide range of industrial and fabrication needs. Engineered for durability and precision.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.649" |
| Length | 29" |
| Width | 22" |
Built to exacting engineering tolerances, this 304 stainless steel sheet measures 0.649 inches in thickness, 29 inches in length, and 22 inches in width. Composed of a minimum of 18% chromium and 8% nickel, 304 stainless steel provides excellent resistance to atmospheric corrosion, as well as many organic and inorganic chemicals. Its non-magnetic properties and suitability for welding make it an ideal material for food processing equipment, chemical containers, marine hardware, and general fabrication where hygiene and longevity are critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting area is clean and well-lit. 2. Accurately measure and mark the desired cut lines on the sheet. 3. Utilize appropriate cutting tools (e.g., shear, plasma cutter) with proper safety precautions for stainless steel.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel cutting tools which can lead to contamination and premature corrosion. | Always use dedicated stainless steel cutting tools or ensure thorough cleaning of tools before use. |
| Inadequate edge preparation for welding, leading to structural weaknesses. | Properly bevel edges according to welding specifications and ensure a clean, oxide-free surface. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom fabrication and prototyping, Food processing and sanitary equipment, Chemical processing and storage tanks, Marine and offshore components, Architectural elements and cladding.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||