This robust 304 stainless steel stock sheet is precision-manufactured for critical hydraulic system components. Its superior corrosion resistance and strength ensure reliable performance in demanding environments.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.642" |
| Length | 31" |
| Width | 32" |
Trusted by engineers across multiple sectors, this 304 stainless steel stock sheet offers exceptional performance for hydraulic applications. With precise dimensions of 0.642 inches thickness, 31 inches in length, and 32 inches in width, it meets stringent industry standards. The inherent properties of 304 stainless steel, including its excellent corrosion resistance to a wide range of chemicals and its mechanical strength, make it ideal for fabricating hydraulic manifolds, pressure vessels, pump housings, and valve bodies where integrity and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material certification against project requirements. 2. Prepare for cutting and shaping using appropriate fabrication techniques for 0.642" thick stainless steel. 3. Integrate into the hydraulic system, ensuring proper sealing and load-bearing capacity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a lower grade stainless steel for hydraulic components exposed to corrosive fluids. | Always specify and utilize 304 stainless steel or higher for its proven resistance to a broad spectrum of hydraulic fluids and environmental conditions. |
| Inadequate tolerance checks during fabrication, leading to fitment issues in complex hydraulic assemblies. | Implement strict dimensional verification of cut and machined parts against the 0.642" thickness, 31" length, and 32" width specifications before assembly. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic Manifold Fabrication, Pressure Vessel Construction, Hydraulic Pump and Valve Components, Corrosion-Resistant Hydraulic Tubing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||