This robust 304 stainless steel stock sheet is engineered for superior performance in demanding heating and cooling environments. Its substantial thickness and corrosion resistance ensure longevity and reliability in critical applications.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.636" |
| Length | 18" |
| Width | 13" |
Manufactured under strict quality controls, this 304 stainless steel stock sheet offers exceptional durability and corrosion resistance, crucial for high-temperature and corrosive environments within heating and cooling systems. The material's inherent strength and high chromium-nickel content (typically 18% chromium, 8% nickel) provide excellent resistance to oxidation and pitting. With precise dimensions of 0.636" thickness, 18" length, and 13" width, this sheet is ideal for fabricating heat exchangers, ductwork, custom enclosures, and protective components where thermal stability and material integrity are paramount. Its non-magnetic properties also contribute to its suitability in certain specialized applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from debris before installation. 2. Fabricate according to design specifications, utilizing appropriate cutting and joining techniques for 0.636" thick stainless steel. 3. Integrate into the heating or cooling system, verifying all connections are secure and leak-free.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect welding or cutting procedures for the material thickness. | Employ welding consumables and techniques specifically recommended for 304 stainless steel of this gauge, and use appropriate cutting tools to prevent material degradation. |
| Improper surface preparation leading to reduced corrosion resistance. | Thoroughly clean all surfaces, including edges, to remove any contaminants or oxides before and after fabrication or installation. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Heat Exchanger Fabrication, Industrial Ducting Systems, High-Temperature Enclosures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||