This robust 304 stainless steel stock sheet offers superior corrosion resistance and strength. Precisely manufactured to industry standards, it is ideal for demanding fabrication and construction projects.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.607" |
| Length | 26" |
| Width | 28" |
Manufactured under strict quality controls, this 304 stainless steel stock sheet measures 0.607 inches (approximately 15.4 mm) in thickness, 26 inches (approximately 660 mm) in length, and 28 inches (approximately 711 mm) in width. Composed of a minimum of 18% chromium and 8% nickel, 304 stainless steel exhibits excellent resistance to atmospheric corrosion, many organic and inorganic chemicals, and food processing environments. Its high tensile strength and formability make it suitable for a wide range of industrial applications requiring durability and hygiene.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare the substrate for proper support and alignment. 2. Precisely cut the stock sheet to the required dimensions using appropriate cutting tools. 3. Secure the sheet using approved welding, fastening, or bonding methods.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to material damage or imprecise edges. | Employ carbide-tipped blades or abrasive cutting discs specifically designed for stainless steel to ensure clean and accurate cuts. |
| Failing to account for thermal expansion during welding or fabrication. | Implement proper welding techniques and pre-heat/post-heat procedures to minimize stress and distortion caused by temperature fluctuations. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Industrial Fabrication, Chemical Processing Equipment, Food Service Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||