This 304 stainless steel stock sheet offers superior corrosion resistance and strength, essential for high-pressure hydraulic systems. Precisely manufactured to stringent standards for reliable performance.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.550" |
| Length | 15" |
| Width | 17" |
Manufactured under strict quality controls, this 304 stainless steel stock sheet boasts a robust 0.550" thickness, 15" width, and 17" length. Its 304 alloy composition provides excellent resistance to a wide range of corrosive media, making it ideal for hydraulic manifold blocks, pump housings, and valve components where integrity and longevity are paramount. The material's inherent toughness and weldability ensure suitability for custom fabrication and demanding operational environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet surface is clean and free from debris or contaminants. 2. Position the sheet accurately according to design specifications for cutting or machining. 3. Secure the sheet firmly before commencing any fabrication processes to prevent movement.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower-grade steel not rated for hydraulic pressures. | Always specify and verify 304 stainless steel for hydraulic components to ensure adequate strength and corrosion resistance. |
| Inadequate surface preparation before machining or welding. | Thoroughly clean and degrease the 304 stainless steel surface to prevent contamination and ensure proper material integrity. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic Manifold Blocks, Custom Hydraulic Components, High-Pressure Fluid Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||